1. Press the On/Reset Button
2. Press the 9 Key 3 times
3. Press the # Key
4. Repeat steps 1-3.
To Program the Keypad
1. Press the On/Reset Button
2. Enter the Factory Default Pin 1,2,3,4
3. Press the # Key Twice
4. Press the 1 Key
5. Enter the Transmitter Code
6. Press the # Key
Finding Your Transmitter Code
1. Slide the Cover off your transmitter. Inside you will see a coding block with switches numbered 1-8. Each switch can be set one of three positions. +, 0, - . Translate these settings into a numeric code. + = 1 , 0 = 2, - = 3 This is your transmitter code.
To Set Up A Personal Pin Number
1. Press the On/Reset Button
2. Enter the Factory Default Pin, 1,2,3,4
3. Press the # Key
4. Press the 1 Key
5. Enter your 4 Digit Pin
6. Enter you 4 Digit Pin again
7. Press the # Key To use your Keyless Entry Press the On/Reset Button, Enter your 4 Digit code followed by * 1