Allstar 6500 Keypad

To Clear the Keypad 

1. Press the On/Reset Button 

2. Press the 9 Key 3 times 

3. Press the # Key 

4. Repeat steps 1-3. 

 

To Program the Keypad

 1. Press the On/Reset Button

2. Enter the Factory Default Pin 1,2,3,4 

3. Press the # Key Twice 

4. Press the 1 Key 

5. Enter the Transmitter Code 

6. Press the # Key 

 

Finding Your Transmitter Code

 1. Slide the Cover off your transmitter.

2. Inside you will see a coding block with switches numbered 1-8.

3. Each switch can be set one of three positions. +, 0, - .

4. Translate these settings into a numeric code. + = 1 , 0 = 2, - = 3

5. This is your transmitter code. 

 

To Set Up A Personal Pin Number 

1. Press the On/Reset Button 

2. Enter the Factory Default Pin, 1,2,3,4 

3. Press the # Key

 4. Press the 1 Key 

5. Enter your 4 Digit Pin 

6. Enter you 4 Digit Pin again 

7. Press the # Key 

To use your Keyless Entry Press the On/Reset Button, Enter your 4 Digit code followed by * 1